Why did my CS6 shut itself off while I was on the job?
The CS6 will power off if the battery dies. Charge or replace the battery. [...]
The CS6 will power off if the battery dies. Charge or replace the battery. [...]
Adjust the reel measurement units by pressing menu > Region Options > units or menu [...]
Insert a USB drive. Job data is stored on the thumb drive only. There is no internal memo [...]
If a USB thumb drive is removed before all the data is finished writing, file corruption [...]
The source of the video on the thumb drive must be from an HQ compatible product like the [...]
Select the Menu key and use the arrow keys to navigate to the Set Time and Date settings. [...]
Verify the microphone LED is on under the microphone key. If it is off, press the microph [...]
Only remove a thumb when there is no active media capturing (i.e. recordings, pic, and jo [...]
To record video: Press the Video Key to start recording a video. Press the Microphone Mut [...]
Visit Updating SeeSnake Software for instructions on updating the software on your CS6. [...]
After closing current Jobs and finalizing a Report, remove the thumb drive from the CS6 a [...]
No, the SeeSnake CS6 was designed to record your jobs to a USB thumb drive. In order to c [...]
The CS6 will help you organize your inspections by grouping all the associated still phot [...]
Please visit the CS6 Product Page for full specifications and details located at the foll [...]
The CS6 stores the job data on the USB thumb drive. Removing the thumb drive during playb [...]
This is usually caused by your USB drive. Try using a different brand of thumb drive and [...]
The CS6 comes with an Operator's Manual which includes complete operation instructions. T [...]
The SeeSnake CS6 is a compact, portable camera monitordesigned to connect to a SeeSnake C [...]
Capturing Media You can save jobs and their captured media and reports to the 128 GB inte [...]