Interconnect Cord Reference
Introduction
The SeeSnake interconnect cord connects the SeeSnake camera reel to the monitor. The cord uses a universal 3-pin connector that enables backwards compatibility between any SeeSnake reel and monitor.
The interconnect cord can be used to troubleshoot components of a SeeSnake camera system. From a monitor, the cord can be connected to a FleXmitter® sonde or a camera head to ensure parts are functioning properly. Learn more about component testing here.
SeeSnake Interconnect Cord
If you own a SeeSnake camera reel, you have one of two types of interconnect cords.
1. The SeeSnake interconnect cord included with all systems today uses separate components for flexibility and efficiency. These cords are replaceable and interchangeable across all systems. See components and parts below for this interconnect cord.
2. If your interconnect cord looks like the following, click here. This is an original SeeSnake interconnect cord, consisting of one piece instead of separate components. The camera reels that may use this cord type include Compact series reels (M40/C40/2), rM200 (A/B), microREEL, microDRAIN, and NANOreel.
SeeSnake Interconnect Cord – Modular Components
- Interconnect cord – Uses a universal 3-pin to 3-pin connector. Shipped with all camera reels and connects reel to all SeeSnake monitors.
- Slip ring adapter – Component that adapts the cord to certain camera reels, including Compact series reels (M40/C40/2), rM200 (A/B), microREEL, microDRAIN, and NANOreel.
- CA-350 adapter – Enables SeeSnake cameras to work with RIDGID CA-350 monitors.
Part Catalog Numbers
Interconnect Cord
| RIDGID Part Number | Item |
|---|---|
| 67307 | Interconnect Cord, 3m (10′) |
| 64627 | Interconnect Cord, 10m (33′) |
Additional Troubleshooting Guides
How to remove and install the spring on a SeeSnake camera reel. Removing the spring may be needed for service, troubleshooting, or to inspect components inside the spring.
How to remove an existing transmitter in your SeeSnake camera reel and install a new FleXmitter® part for SeeSnake systems such as the Standard, Mini, Mini Pro, Compact C40, Compact M40, Compact2, rM200A, and rM200B.
Removing the camera head may be needed for service, troubleshooting, or to inspect components inside the spring.