CS10 | SeeSnake

My monitor appears “black” but I can still see the overlay. What happened?

It could be that the contrast on the monitor is at its lowest setting. Try setting it bac [...]

By default, the CS10 software shows you the Count information, but does NOT record this i [...]

This is a way to safely remove the USB drive from the system. You should always eject the [...]

The system was not shut down with the Power key. Improperly shutting down the CS10 withou [...]

When you get the Unsafe Shutdown message on your CS10, pressing the Select key on the key [...]

The system may have had a problem initializing the USB drive. Try removing and then reins [...]

After closing current jobs and finalizing a report, remove the USB drive from the CS10 an [...]

If a yellow exclamation icon appears next to any of your equipment listed in the equipme [...]

Please visit the CS10 Product Page for full specifications and details located at the fol [...]

If using a SeeSnake pipe inspection system with a built-in sonde, detect the camera’s loc [...]

To review the files stored on the USB drive, access the Media List from the Job Manager s [...]

The best way to make notes on your media is to export your data to SeeSnake HQ and edit i [...]

Yes. We have designed both the CS10 and SeeSnake HQ to work together in order to provide [...]

No, the CS10 was designed to record your jobs to a USB drive. In order to capture and sav [...]

Autolog video captures a highly compressed video of an inspection, but uses a smaller fil [...]

Press the Photo key to take a photo. [...]

Press the Video key to start and stop recording a video. The Video LED on the Main Keypa [...]

The CS10 automatically saves photos, videos, and Autolog videos to a job on the USB drive [...]

By using the free software called HQ that comes with every CS10 and found on our HQ page. [...]