CountPlus System Settings

Read this article to learn how to change the system settings for the CountPlus distance measuring device.

You can change the following system settings in the CountPlus: time, date, reel and cable, and units.

To change system settings:

  1.  Press the Menu key.
  2.  Select the Tools Menu.

From the Tools Menu, select the settings you want to change.

Time

  1.  Select Time Settings.
  2.  Use the Arrow keys to change the time format and values.
  3.  Press the Menu key to save the settings and exit the menu.

Date

  1.  Select Date Settings.
  2.  Use the Arrow keys to change the date format and values.
  3.  Press the Menu key to save the settings and exit the menu.

Reel and Cable

Before you begin using the CountPlus, it is important to enter information about the reel and cable you are using. Entering this information helps the CountPlus measure the distance traveled through the pipe. There are three values you can set: cable length, reel type (Standard or Mini), and cable type (Standard or Mini).

  1.  Select Reel and Cable Settings.
  2. Use the Arrow keys to change the values for the reel and cable you are using.
  3.  Press the Menu key to save the settings and exit the menu.

Units

You can set the count to use Imperial or Metric units of measurement. You can also format how the units are displayed.

  1.  Select Unit Settings.
  2.  Use the Arrow keys to change the unit of measurement and format.
  3.  Press the Menu key to save the settings and exit the menu.

CountPlus Text Slides

Learn how to create, edit, and switch between text slides on the CountPlus distance measuring device.

CountPlus System Settings

Learn how to change the CountPlus system settings, including the time, date, reel and cable, and units of measurement.

Installing the CountPlus

Learn how to install the CountPlus counter accessory for SeeSnake Standard and Mini camera reels.

Go to Top