SeeSnake CS65x Job and System Settings
This article describes how to edit job and system settings on the RIDGID® SeeSnake® CS65x Wi-Fi enabled monitor.
Job Settings
Press the job manager key and select the Job Settings tab to adjust the CS65x’s job settings.
Adding Your Company Information
Under Company information, select Contact. Set Always in report to Yes to have your company information automatically entered in job reports.
Primary Storage Settings
You can set the system’s job storage preferences so that captured media saves to the internal SSD or an inserted USB drive by default. Scroll down to Primary job storage in the Job Settings tab and cycle through SSD, USB 1, or USB 2.
Syncing Jobs
You can choose whether to automatically sync jobs to an inserted USB drive. Next to “Sync open job to available USB drives?” cycle between Always sync, Never sync, and Ask me. When Ask me is selected, you will be asked each time a new job is created if you want to sync the job or not.
If the open job is not synced to a USB drive at the beginning of the inspection, you can sync it later. Go to the USB drive you want to sync to in the Job Manager and select Start USB sync. A check mark indicates that syncing is complete and you can safely remove the USB drive.
System Settings
Settings
Adjust volume, sound preferences, microphone default, photo key behavior default, and view your device’s name.
Bluetooth Options
Enable and disable Bluetooth.
Reel Options
Set when and how overlay details are displayed, measurement units, and default sonde settings.
Camera Settings
Enable automatic gain correction and adjust hue, brightness, contrast, and saturation.
Wireless Options
Enable and disable Wi-Fi.
LCD Settings
Adjust LCD display brightness and contrast.
Date/Time Options
Modify the date and time.
GPS Status
Enable and disable GPS.
Power Information
View power source.
Region Options
Change language and other locale specific settings.
About
View software and hardware version information and restore system settings.