About TruSense Firmware 2092

TruSense firmware version 2092 applies adjustments to the camera’s color output to reduce red hue and improve visibility in some in-pipe environments. You may notice increased contrast in-pipe, more true-to-life colors within and outside of the pipe, and more clearly defined details.

How to Update

  1. Install CSx software version 2.20.35 onto your device. For instructions, visit the article on updating your CSx monitor here.
  2. Connect the updated monitor to a TruSense camera system. The monitor will begin updating the camera’s firmware in the background. This process usually takes 20-30 minutes, and its progress can be tracked in the TruSense settings found in your CSx monitor’s menu. You can continue to use your camera and monitor as normal while the update is being installed.
  3. When installation is complete, the correction will be applied the next time you restart your monitor.
  4. Note: If the system is powered down while the installation is in progress, the monitor will resume installation from the same spot when connected and powered back on.

TruSense Support Topics


RIDGID® SeeSnake camera reels with TruSense technology bring powerful data capability to plumbing diagnostics.


The TiltSense inclinometer calculates the angle of the camera head, providing an indicating of the pitch of the pipe. Read more about using TiltSense here.

TruSense Counter

Read this article to learn how to retrofit the TruSense cable counter to RIDGID® SeeSnake® Standard and Mini camera reels.

TruSense Updates

Learn how to enable TruSense™ technology on your SeeSnake pipe inspection equipment.

Go to Top