SeeSnake Compact2 Support

The RIDGID® SeeSnake® Compact2 camera reel offers fast, easy setup and can take on the most diverse and demanding inspection conditions. The Compact2 features a self-leveling camera at the end of a push cable stiff enough to give you the power to push through small or restricted pipes, yet flexible enough to make multiple tight turns.

The Compact2 has a 30 m [100 ft] long, friction-reducing push cable and a 25 mm [1 in] self-leveling camera designed to inspect pipes ranging from 38 mm to 152 mm [1.5 in to 6 in] in diameter, depending on pipe conditions. Once a point of interest has been found in the pipe, use the integrated 512 Hz sonde and a receiver to locate its position.

All SeeSnake monitors can connect to the Compact2 with the SeeSnake system cable. The SeeSnake CS6x Versa and CS6xPak monitors are specifically designed to mount on the Compact2’s docking system for viewing ease, quick setup, and effortless transport.

Video

Support Topics


Clamshell Kickstand Instructions

Follow these instructions to learn how to set up your kickstand for the RIDGID® SeeSnake® microDrain™, microReel™, and nanoReel™ systems.

How to View the SeeSnake Camera Reel Odometer

The odometer lets you know the total cable distance pushed over the life of the RIDGID SeeSnake camera reel. This article lets you know how to access the odometer with a SeeSnake monitor.

RIDGID CA-350 Adapter Instructions

How to install the CA-350 Adapter for using the RIDGID micro CA-350 for the RIDGID SeeSnake microReel, microDrain, or nanoReel systems.

SeeSnake Tips & Tricks

Watch this video to learn tips and tricks on getting the most out of your SeeSnake camera reel during a pipe inspection.

Adding Inspector Information

How to save default inspector information to a RIDGID SeeSnake inspection monitor so you can quickly add it to reports.

Go to Top