SeeSnake Mini with TruSense® Support

The RIDGID® See­Snake® Mini with TruSense® technology is a portable camera reel in the SeeSnake family of diagnostic systems.

The Mini reel is ideal for inspecting 38 to 203 mm [1.5 to 8 in] lines and comes with a 61 m [200 ft] push cable. The cable is reinforced with fiberglass and flexible enough to travel through sharp 90° bends, yet stiff enough to push the camera head long distances.. The SeeSnake Mini comes with either a fixed or self-leveling camera, which mechanically rotates to keep the camera upright.

TruSense® Technology

TruSense technology establishes a two-way communication link between the camera head and a connected SeeSnake CSx TruSense-capable device. Available CSx devices include the CS65xr, CS6x Versa, and CS12x monitors, as well as the CSx Via mobile inspection device. With TruSense, advanced sensors on the camera head are able to convey valuable information about the in-pipe environment.

Included with the SeeSnake Mini:

  • TiltSense™ on-camera inclinometer – provides the camera’s degree of tilt and displays it on the monitor
  • High dynamic range image sensor – expands the camera’s dynamic range, reducing blown-out areas and sections of the pipe that are too dark to see, offering superior clarity and detail

TruSense Highlight Video


Support Topics


How to View the SeeSnake Camera Reel Odometer

The odometer lets you know the total cable distance pushed over the life of the RIDGID SeeSnake camera reel. This article lets you know how to access the odometer with a SeeSnake monitor.

Clamshell Kickstand Instructions

Follow these instructions to learn how to set up your kickstand for the RIDGID® SeeSnake® microDrain™, microReel™, and nanoReel™ systems.

RIDGID CA-350 Adapter Instructions

How to install the CA-350 Adapter for using the RIDGID micro CA-350 for the RIDGID SeeSnake microReel, microDrain, or nanoReel systems.

SeeSnake Tips & Tricks

Watch this video to learn tips and tricks on getting the most out of your SeeSnake camera reel during a pipe inspection.

Adding Inspector Information

How to save default inspector information to a RIDGID SeeSnake inspection monitor so you can quickly add it to reports.