SeeSnake microReel Support

The RIDGID® SeeSnake® microReel is a portable pipe inspection diagnostic reel and camera. It comes with a sonde within the camera head and optionally includes a CountPlus counter to measure the push cable distance traveled. The microReel has a unique removable cable drum, for convenience in cleaning or replacing the push cable. It also has a removable system cable, enabling the microReel to be configured for use with any SeeSnake monitor or for use with a RIDGID hand-held inspection camera monitor such as the micro CA-350.

The microReel uses a stiff 30 m (100 ft) push cable, making it suited for longer runs in pipes 38 mm to 102 mm (11.5 to 4 in) in diameter. Because of its push cable, the microReel should not be used in toilet traps. Use the SeeSnake microDrain to perform inspections in toilet traps instead.

Video

Support Topics


Clamshell Kickstand Instructions

Follow these instructions to learn how to set up your kickstand for the RIDGID® SeeSnake® microDrain™, microReel™, and nanoReel™ systems.

How to View the SeeSnake Camera Reel Odometer

The odometer lets you know the total cable distance pushed over the life of the RIDGID SeeSnake camera reel. This article lets you know how to access the odometer with a SeeSnake monitor.

RIDGID CA-350 Adapter Instructions

How to install the CA-350 Adapter for using the RIDGID micro CA-350 for the RIDGID SeeSnake microReel, microDrain, or nanoReel systems.

SeeSnake Tips & Tricks

Watch this video to learn tips and tricks on getting the most out of your SeeSnake camera reel during a pipe inspection.

Adding Inspector Information

How to save default inspector information to a RIDGID SeeSnake inspection monitor so you can quickly add it to reports.

Go to Top