How to Customize Power Settings on the CS12x

This article describes customizing how the SeeSnake® CS12x Wi-Fi enabled monitor is powered when two battery packs are inserted.

Steps

  1.  Press the Menu key.
  2. Scroll down to Power Information.
  3. Navigate to Preferred battery drain mode.
  4.  Press the Select key or the right arrow key to cycle between Right battery first, Left battery first, or Both batteries.

When Both batteries is selected, the CS12x selectively drains the battery packs until they are at the same percentage, and then drains them evenly until they are both depleted.

The CS12x automatically switches to AC power when the AC adapter is connected.

Note: The AC adapter does not recharge battery packs.

How to View the SeeSnake Camera Reel Odometer

The odometer lets you know the total cable distance pushed over the life of the RIDGID SeeSnake camera reel. This article lets you know how to access the odometer with a SeeSnake monitor.

TruSense Image Capture Settings

Learn how to adjust the image capture settings on your SeeSnake CS65xr, CS6x Versa, CS12x, CS65x, CS6x, or CS6xPak monitors. Set the hue, brightness, contrast, and saturation of recorded media, and enable/disable automatic gain correction.

Video Playback

Learn how to play back recorded videos on SeeSnake CSx monitors.

Quick Access Menus

Learn how to use the Quick Access menus on SeeSnake CS65x, CS65xr, CS6x, CS6xPak, CS6x Versa and CS12x monitors for pipe inspections.

Go to Top